Ecovacs

Perfection for ECOVACS GOAT G1, G1-800, G1-2000, O500, O800 RTK, O1200 RTK & GX-600

Maximum efficiency for your GOAT series: This high-quality blade disc is manufactured using a precise injection molding process and impresses with its extreme dimensional accuracy and high stability. With the glass fiber-reinforced 7-blade EvoSign Tuning blade disc, you can achieve precise cutting results in a flash.

Your advantages at a glance

✅ Suitable for: ECOVACS GOAT G1, G1-800, G1-2000, O500, O800 RTK, O1200 RTK & GX-600

✅ Dimensions: 187 mm Ø | 220 mm cutting width

✅ Ultra stable: Only 178g

✅ Original cutting heights: 100% identical to the factory blade disc

✅ Perfect fit: Compatible with (Ø 7 mm bolt circle) blades & M4 screws

✅ 7-blade system: More cutting surface for faster, more even mowing

✅ 4-way usable blades: Economical 2-hole design

✅ Free blade movement: Freely rotating blades for clean cuts

✅ Smooth-coated surface: Hardly any grass or dirt adhesion

✅ 1:1 installation: Directly like the original – quick and easy

✅ Force flow-optimized design: FEM-analyzed for maximum load capacity

✅ Glass fiber-reinforced Polypropylen: Weatherproof, water & chemical resistant, temperature resistant (cold & heat), impact resistant & tensile strength.

Color: Anthracite

📦 Scope of delivery

A ready-to-use 7-blade EvoSign tuning blade disc for ECOVACS GOAT mowing robots (without blades and screws)

Important note: Installation and operation are at your own risk. All manufacturer specifications, in particular safety instructions and warranty conditions, remain valid without restriction.

Perfection for ECOVACS GOAT G1, G1-800, G1-2000, O500, O800 RTK, O1200 RTK & GX-600
Maximum efficiency for your GOAT series: With the ultra-light 9-blade EasyCut tuning blade disc from GreenGears3D, you can achieve precise cutting results in a flash, without the need for an adapter.

Your advantages at a glance

✅ Suitable for: ECOVACS GOAT G1, G1-800, G1-2000, O500, O800 RTK, O1200 RTK & GX-600
✅ Dimensions: 187 mm Ø | 220 mm cutting width
✅ Ultra-light & stable: Only 97 g – protects the motor & battery
✅ Original cutting heights: 100% identical to the factory blade disc
✅ Perfect fit: Compatible with Ø 7 mm mounting-hole blades & M4 screws
✅ 4-way blades: Economical 2-hole design
✅ Free blade movement: Freely rotating blades for clean cuts
✅ Integrated brass threaded sleeves: 9 × M4 – secure, durable fastening
✅ Smooth-coated surface: Hardly any grass or dirt adhesion
✅ 1:1 assembly: Just like the original – quick and easy
✅ Force flow-optimized design: FEM-analyzed for maximum load capacity
✅ Premium plastic: UV-resistant, water- and chemical-resistant, cold/heat-resistant, impact-resistant, and tensile-resistant

Colors: Anthracite & Orange

📦 Scope of delivery
One ready-to-use 9-blade EasyCut tuning blade disc for ECOVACS GOAT robotic lawn mowers (without blades and screws)

Please note:
Slight variations in color, shade, or texture between the product and photos are possible, but do not affect function or quality.
Important note: Assembly and operation are at your own risk. All manufacturer's specifications, in particular safety instructions and warranty conditions, remain valid without restriction.

Perfection for GOAT A1600 RTK, A2500 RTK & A3000 LiDAR (PRO)
Professional-level precision work: With the improved 7-blade EasyCut tuning blade discs from GreenGears3D, you can achieve an ultra-clean cut every time, even on difficult terrain.

Your advantages at a glance

✅ Suitable for: GOAT A1600 RTK, A2500 RTK & A3000 LiDAR (PRO)
✅ Dimensions: 140 mm Ø | 170 mm cutting width
✅ Ultra-light & stable: Only 91 g – protects the motor & battery
✅ Original cutting heights: 100% identical to the factory blade disc
✅ Perfect fit: Compatible with Ø 7 mm mounting-hole blades & M4 screws
✅ 7-blade system: More cutting surface for faster, more even mowing
✅ 4-way blades: Economical 2-hole design
✅ Free blade movement: Freely rotating blades for clean cuts
✅ Integrated brass threaded sleeves: 9 × M4 – secure, durable fastening
1:1 assembly: Just like the original – quick and easy
✅ Force flow-optimized design: FEM-analyzed for maximum load capacity
✅ Premium plastic: UV-resistant, water- and chemical-resistant, cold/heat-resistant, impact-resistant, and tensile-resistant

Color: Anthracite

📦 Scope of delivery
2 × improved 7-blade EasyCut tuning blade disc for GOAT A1600 RTK, A2500 RTK & A3000 LiDAR (without blades)
Includes stainless steel T-spacer sleeves

Please note:
Slight variations in color, shade, or texture between the product and photos are possible, but do not affect function or quality.
Important note: Assembly and operation are at your own risk. All manufacturer's information, in particular safety instructions and warranty conditions, remain valid without restriction.

Perfection for ECOVACS GOAT G1, G1-800, G1-2000 & GX-600
Maximum cutting performance for your GOAT series – 14% more area, precise mulching and easy installation with adapter.

Your advantages at a glance

✅ Suitable for: ECOVACS GOAT G1, G1-800, G1-2000 & GX-600 (Not for O series)
✅ Dimensions: 200 mm Ø | 234 mm cutting width – 14% larger area
✅ Ultra-light & stable: Only 119 g – protects the motor & battery
✅ Original cutting heights: 100% identical to the factory blade disc
✅ Perfect fit: Compatible with Ø 7 mm mounting-hole blades & M4 screws
✅ 4-way blades: Economical 2-hole design
✅ Free blade movement: Blades mounted on stainless steel spacer T-sleeves for free rotation
✅ Integrated thread sleeves: Secure fastening, extra durable
✅ Smooth-coated surface: Hardly any grass or dirt adhesion
✅ Easy installation: Just like the original – with included adapter
✅ Power flow-optimized design: FEM-analyzed for maximum load capacity
✅ Premium plastic: UV-resistant, cold/heat-resistant, impact-resistant & tensile-resistant

Colors: Anthracite

📦 Scope of delivery
Tuning blade disc for 9 blades with 9 stainless steel spacer T-sleeves for ECOVACS GOAT G1, G1-800, G1-2000 & GX-600 (without blades) (Not for O series)

Please note:
Slight variations in color, shade, or texture between the product and photos are possible, but do not affect function or quality.
Important note: Assembly and operation are at your own risk. All manufacturer's specifications, in particular safety instructions and warranty conditions, remain valid without restriction.

This knife & screw set is suitable for all knife plates offered.

Technical data:

• Material: Titanium carbide-coated stainless steel
• Dimensions: 36.2 x 18 x 0.85 mm
• Hole diameter: 7 mm (double hole)
• Mounting screws: 7 M4 screws

The blade set contains 45 blades and 45 M4 mounting screws, ensuring excellent durability and a precise, clean cut.

We recommend securing the blades with the screws and safety paint provided.

Warnings:

Caution: Sharp blades. Risk of injury. Use only with compatible robotic lawn mowers. Keep away from children.

This blade & screw set is suitable for our 9x blade discs.

• They can be used up to 4 times in a completely new condition thanks to their 2 holes.
• The knife set is made of carbon steel and is coated with titanium, which ensures a high level of robustness

Blade disk adapter 
Models: GOAT G1, GOAT G1-800, GOAT G1-2000 and GOAT O500, GOAT O800 RTK, GOAT O1200 RTK and GX-600

Compatibility:
This adapter is specially designed for use with our blade discs and ensures a precise reduction of the cutting height by 5 millimetres.

Installation instructions:

• Only use our blade discs and the screws offered or screws of exactly the right length (M4 x 16 mm length).
• An incorrect screw length can impair the stability of the adapter and jeopardize safety.

Important notes:

• Not compatible with other blade plates or adapters.
• Ensure that assembly is carried out in accordance with the instructions and that all screws are tightened securely.

Lowering adapter 10 mm – for reduced cutting height on Ecovacs Goat models

With this adapter, you can lower the cutting height of your Ecovacs Goat robotic lawn mower by approx. 10 mm, ideal for a particularly clean and precise cut. The adapter is specially designed for our tuning blade discs and ensures a secure, stable connection.

• ✅ 10 mm cutting height reduction for a precise, deep cut

• ✅ Only suitable for our tuning blade discs

• ✅ Robust, precise fit for Goat G1, O, A, and GX series

• ✅ Perfect in combination with M4 x 22 screws

• ✅ Easy installation with full control

✅ Compatibility:
Suitable for the following models:

• GOAT G1, G1-800, G1-2000

• GOAT O500, O800 RTK, O1200 RTK

• GOAT A1600 RTK, A2000 RTK, A2500 RTK, A3000 RTK

• GX-600

✅ Assembly instructions:

• Use only our tuning blade discs and matching screws with the exact correct length (recommended: M4 x 22 mm)

• Screws of the wrong length can lead to instability and safety risks.

• Ensure that the screws are tight and that assembly is carried out in accordance with the instructions.

Important information:

• Only compatible with our tuning blade discs, not with original or third-party products.

• Use at your own risk. The manufacturer's instructions and safety regulations for the robotic lawn mower remain valid.

• Modifications such as lowering the vehicle may affect the manufacturer's warranty.

Get the most out of your Ecovacs GOAT! navigation system. The positioning of the beacons is crucial for a seamless map. With our wall mount, you can securely install your beacons on walls, posts, or fences.

Product Details:

Stable Connection: By mounting above ground level, dead zones are minimized and UWB signal coverage is optimized.

Design Innovation: Thanks to the integrated bayonet system, the beacon can be secured or removed with a short twist – perfect for when batteries need to be replaced.

Mounts Anywhere: The bracket features discrete holes for wall mounting screws as well as slots for cable ties to attach it to poles or pipes.

Material Quality: Manufactured from high-quality, UV-resistant specialized plastic designed to brave wind and weather.

Note: Mounting accessories such as screws or cable ties are not included in the scope of delivery.

1x set of screws for mounting our tuning discs 1x set contains three cylinder head screws with hexagon socket:

• M4x12mm, dimensions as for the original screws
• Hexagon socket
• High-strength alloy steel, strength class 12.9
• Rolled washer and spring washer

Installation instructions: The installation is carried out in accordance with the robotic lawnmower manufacturer's instructions. Please observe the

Safety instructions: Always follow the safety instructions of the robotic lawnmower manufacturer.
Risk warning: Use these screws at your own risk due to individual intervention.

Warranty: Please note that replacing the blade disc with an accessory such as our tuning blade discs may limit or affect the robotic lawnmower's warranty.

Safety information:

Blade disk adapter 
Models: GOAT A1600 RTK, GOAT A2000 RTK, GOAT A2500 RTK, GOAT A3000 RTK

Compatibility:
This adapter is specially designed for use with our blade discs and ensures a precise reduction of the cutting height by 5 millimetres.

Installation instructions:

• Only use our blade discs and the screws offered or screws of exactly the right length (M4 x 16 mm length).
• An incorrect screw length can impair the stability of the adapter and jeopardize safety.

Important notes:

• Not compatible with other blade plates or adapters.
• Ensure that assembly is carried out in accordance with the instructions and that all screws are tightened securely.

Maximum Depth for Your XXL Upgrade

When upgrading your Ecovacs GOAT to a larger blade disc, the original guard often reaches its limits. Our specially developed XXL blade guard offers the perfect solution: it completely encloses the larger disc, ensuring a safe mowing experience.

Product Details:

• Tailor-made: Perfect fit for all Ecovacs GOAT G1, GX & O models.

• Safety First: Effective shielding of the rotating blades for maximum protection of children, pets, and wildlife (such as hedgehogs).

• Durability: UV-resistant and extremely resistant to stone chips or impacts.

• Easy Installation: Uses the original mounting points – ready for use in just a few minutes.

Scope of Delivery:

• 1 × XXL Blade Guard (suitable for Ecovacs GOAT G1, GX & O

The Invisible Insurance for Your Robot

Anyone who loves their garden knows the problem: narrow passages along house walls or hard garden bed edges quickly leave unsightly marks on the robot mower. Our bumpers, specially developed for the Ecovacs GOAT series (G1 & GX), act as invisible insurance for your robot.

Product Details:

• Custom Fit: The shape is precisely adapted to the contours of the GOAT G1 and GX.

• Secure Hold: The bumpers sit firmly and vibration-free, but can be removed without leaving residue if necessary.

• Material Quality: We use a technical polymer that dampens shocks and does not become brittle over time.

• Application Area: Ideal for gardens with many wall edges, narrow shrubbery, or stone borders.

Scope of Delivery:

• 1 × Set of Anti-Scratch Bumpers (Left & Right) for Ecovacs GOAT G1 / GX.